Nokia G10 (TA-1346) official firmware and preloader EMI files. Fix hard reset issues, pattern unlock, and solve the 'No Recovery Mode' error with our step-by-step guide and software fix.
nokia g10 scatter file, nokia g10 flash file, nokia ta-1346 flash file, nokia ta-1346 flashing, nokia g10 da file, nokia g10 custom rom,
Nokia G10 (TA-1346) Firmware (Flash File) Download Preloader EMI | Hard Reset/Pattern Unlock Android 12 No Recovery Solution
📱 Nokia TA-1346 Overview
smartphone
This is a classic feature phone designed for users who want reliability, long battery life, and modern connectivity without the complexity of a smartphone.
⚙️ Key Specifications of TA-1346
hardware and software
Below are the main hardware and software features of the Nokia TA-1346 model:
- 📡 Network: 4G LTE support with VoLTE for clear HD voice calls
- 🖥️ Display: 1.8-inch QQVGA screen
- 🧱 Design: Durable polycarbonate body with classic candy-bar style
- 🔋 Battery: Removable 1020 mAh battery with long standby time
- 📸 Camera: Built-in rear camera
- 📻 FM Radio: Works with or without headset
- 🎵 Music: MP3 player support
- 💾 Storage: microSD card support up to 32GB
- 🎮 Games: Pre-loaded classic games including Snake
- 🔦 Utility: LED torch (flashlight)
🔍 Common Reasons for Searching TA-1346
Firmware Updates
Users usually look up this model number for the following purposes:
- 🛠️ Firmware Updates: Updating software using Nokia Software Recovery Tool
- 🌍 Compatibility: Checking 4G LTE band support in their region
- 📘 User Manual: Finding the correct guide for the 2021 4G variant
🔄 How to Hard Reset Nokia G10 (TA-1346)
factory reset will erase all data
There are two easy methods to hard reset the Nokia G10 (TA-1346). Warning: A factory reset will erase all data, including contacts and messages.
📞 Method 1: Using Secret Code (Easiest)
If your phone is turned on and you can access the home screen, follow the steps below:
- 📱 Dial *#7370# on the phone keypad
- ✅ Select Yes / OK when “Restore factory settings?” appears
- 🔐 Enter the default Nokia security code: 12345
- 🔄 The phone will restart and reset automatically
⚙️ Method 2: Using Settings Menu
Restore Factory Settings
You can also reset the phone directly from the settings menu:
- 🧭 Press the Menu button and open Settings
- 📂 Select Phone Settings
- ⬇️ Scroll down and choose Restore Factory Settings
- 🗑️ Select Full Restore (Delete Data)
- 🔐 Enter the default security code 12345 and confirm
⚠️ Important Note (If Phone Is Locked)
not support Android-style recovery mode
If you forgot the phone lock and cannot access the menu or dial codes, keep this in mind:
- 🚫 Nokia G10 (TA-1346) does not support Android-style recovery mode
- 🔘 Button-based hard reset is not possible on this model
- 🛠️ Software flashing from a professional mobile repair shop is required
🧩 MediaTek (MTK) Platform Confirmation
EMI / Preloader Error
The Nokia G10 (TA-1346) uses a MediaTek (MTK) chipset. If UnlockTool shows preloader_T99652AA1, this confirms the device is based on the MediaTek platform.
❌ Error Explanation (EMI / Preloader Error)
EMI Fail / Preloader Error
This issue is commonly known as EMI Fail or Preloader Error. Follow the correct steps below to fix the problem.
1️⃣ Use MTK BROM Mode in UnlockTool
UnlockTool
To reset or unlock Nokia G10 (TA-1346) using UnlockTool:
- 🧰 Open UnlockTool and go to the MediaTek tab
- 📂 In the sidebar, select BROM | Generic or Custom Preloader
- 📱 Choose model Nokia G10 (TA-1346)
- 🔓 If the error still appears, first click Disable Auth (VUA)
2️⃣ Preloader File Issue
UnlockTool library,
If the tool asks for a preloader file or gets stuck on preloader_T99652AA1, do the following:
- 📁 Click on Select Preloader
- 🗂️ From UnlockTool library, select Nokia G10 (TA-1346) or the matching MT6765 platform
- 📦 If you have firmware, manually load preloader_T99652AA1.bin from the firmware folder
3️⃣ Correct Boot Key Connection
Nokia TA-1346 Test Pint
Boot keys are very important for MediaTek feature phones. Try the following methods:
- 🔘 Option A: Hold the Center / OK key and connect the USB cable
- 🔘 Option B: Hold * and # together, then connect USB
- 🔋 Option C: (Removable battery) Remove battery → Click Factory Reset → Connect USB → Insert battery immediately
4️⃣ VCOM Driver Check
Check the device name in Windows Device Manager:
- ✅ It should appear as MediaTek USB VCOM Port or MTK USB Port
- ⚠️ If Preloader USB VCOM appears briefly and disappears, you may need to install a libusb filter
🔧 Nokia G10 BROM Mode via Test Point (UnlockTool)
using UnlockTool,
To bring the Nokia G10 into BROM mode using UnlockTool, a Test Point connection is required.
📍 Nokia G10 Test Point Location
The test point on the Nokia G10 motherboard is located on the back side of the board. Follow these steps to access it safely:
- 🔓 Remove the back cover and any protective shield
- 🔋 Disconnect the battery connector
- 🟡 Look for small golden dots near the battery connector or fingerprint sensor ribbon cable
- ⚡ On most Nokia MTK models, short the CLKO point or a specific dot to Ground (GND) (any metal surface)
🖼️ Test Point Image Note
find Nokia TA-1346 Test Pint
For Nokia G10, UnlockTool usually provides a Test Point image. You can find it by selecting the model under the Nokia tab inside UnlockTool.
⚙️ UnlockTool Procedure (Step-by-Step)
MTK Port
Follow the exact steps below to enter BROM mode and perform reset or FRP:
- 1️⃣ Open UnlockTool and go to the MediaTek tab
- 2️⃣ Search and select Nokia G10 from the side menu
- 3️⃣ Click on Factory Reset + FRP
- 4️⃣ Using tweezers, short the Test Point to Ground and at the same time connect the USB cable
- 5️⃣ Once the tool detects MTK Port, remove the tweezers
❌ If Test Point Does Not Work (BROM / Preloader Error)
Custom Preloader
If you encounter the preloader_T99652AA1 error, it means the device security level is set to High. Use the solution below:
- 🔓 First, click Disable Auth in UnlockTool
- 📂 Select Custom Preloader
- 📦 Load preloader_T99652AA1 file from the firmware (if available)
- 🔄 Run the Factory Reset operation again
Firmware (Flash File) Information:
Below is the complete firmware (flash file) information for Nokia G10 (TA-1346). This firmware can be used for factory reset, FRP removal, bootloop fix, dead recovery, and other software-related issues. Make sure to use the correct flash tool and drivers before proceeding.
| Name: | Nokia G10 (TA-1346) |
| Size: | 1.54GB |
| CPU: | MT6765 |
| OS: | Android 12 |
| Flash Tools: | Download |
| Drivers: | Download |
| Preloader EMI: | Download |
| Get Link: | Download |
| Password: | Free (No Password) |
👉 Please Support Us 👍Subscribe OUR YouTube Channel ❤️
NOKIA G10 (TA-1334/TA-1346) Hard Reset/Pattern/Hang on Logo fix No Recovery Solution | Unlock Tool
While we strive to provide working and tested files, we do not take any responsibility for any damage to your device during the process. Please proceed at your own risk and ensure you have a backup of your data before flashing or installing any software.
⬇️ Download Section
🌟 Why Choose Us?
Our goal is to provide you with authentic and fully tested files. We make
technology easy for everyone—whether you are a beginner or a professional
Mobile/PC technician.
🚀 Daily Updates
We update our library daily to ensure you always get the latest tools and
software.
🛡️ Safe and Secure
Your data and device safety are our top priority. All files are virus-free and
thoroughly scanned.
⚡ Fast Download Speed
We use premium servers to save your time and ensure quick and smooth
downloads.
🛠️ Expert Support
Providing files is not enough—we also offer proper usage guides and
step-by-step instructions.
✅ 100% Working Links
All our links are active and functional. If any link has an issue, our team
fixes it immediately.
❤️ Also Take a Look at These
Nokia G10 TA-1346 preloader_T99652AA1
Nokia G10 TA-1346 preloader_T99652AA1
📂 Firmware Information:
📌 This firmware package contains all required images and tools for flashing Nokia G10 (TA-1346).
