Nokia 106 TA-114 (China Clone Phone) Firmware (Flash File)
📥 Nokia 106 (TA-1114) Stock Firmware ROM
Official Download & Flashing Guide
💻 On this page, you can find the official link to download the Nokia 106 (TA-1114) Stock Firmware ROM (flash file) package for your computer.
📦 The firmware package comes as a compressed file (ZIP, 7z, RAR) which contains:
- 🗂 Flash File
- 🛠 Flash Tool
- ⚙️ USB Driver
- 📖 How-to Flash Manual
📱 We have shared stock ROMs for Nokia 106 (TA-1114) with free download links below. Flashing is useful if the mobile is running slow or is completely broken due to outdated or corrupted firmware. Using these flash files/Stock ROMs can restore your device to working condition.
⚡ You can use different tools or boxes for flashing Android mobiles. Flashing with the latest flash files will restore your phone to its original settings. Before flashing, it is recommended to take a backup of your important data. After successful flashing, you can safely restore your backup data.
🔌 Flashing tools allow you to flash mobiles via USB data cable without the need for flashing boxes. Flashing with tools can be slightly more challenging than using boxes, but it allows you to install the latest firmware on your Nokia 106 (TA-1114)
ℹ️ Additional Information
🔋 Your device must have at least 30% battery backup before starting the flashing process to avoid interruptions.
💾 Before flashing, always backup your data to prevent any data loss, as flashing will wipe all data on your device.
⚠️ It’s crucial to flash your device with the correct firmware. Using the wrong file can completely brick your device.
🎯 Always choose firmware based on your device’s model and region. Wrong firmware may cause permanent damage.
🌐 If you need the official and latest USB driver for any 📱 Mobilephone device, visit the Smart and Feature phone Drivers
📱 How to Flash MTK (MediaTek) Smartphone
🤖 Android Phone
ℹ️ Here is a simple and complete guide to flash an MTK (MediaTek) phone or keypad device. This method works for most MediaTek MT65xx, MT67xx, MT68xx, MT69xx chipset devices.
🔧 Requirements
💻 Windows PC
- 💻 Windows PC (Windows 7 / 8 / 10 / 11)
- 🔌 Original USB cable
- 📂 MTK firmware file
- 📱 Scatter File (.txt)
- ☎️ .BIN / .PAC (for keypad phones)
- 🛠 SP Flash Tool (Smart Phone Flash Tool)
- ⚙️ MediaTek USB Driver installed
- 🔋 Phone battery charged (minimum 40%)
⚙️ Step 1: Install MTK USB Drivers
- ⬇️ Extract MTK USB Driver package
- ▶️ Run DriverInstall.exe
- 🔄 Restart your PC
⚠️ Driver installation is mandatory, otherwise the PC will not detect the device.
🛠 Step 2: Open SP Flash Tool
- 🖥 Run SP_Flash_Tool.exe as Administrator
- ⚙️ Click Choose Scatter File
- 📁 Select the firmware scatter file (.txt)
- ⏳ Wait until all firmware files load completely
⚙️ Step 3: Tool Settings (Important)
✔️ Check properly Tool settings
- ⚙️ Click Options / Settings
- ✅ Enable Download Only / Firmware Upgrade (recommended)
- ❌ Do NOT enable Format All unless necessary
- ✔️ Click OK to save settings
📲 Step 4: Flash the Phone
🔌 Do not disconnect your mobile phone during flushing.
- ▶️ Click Download in SP Flash Tool
- 🔴 Power OFF the phone
- 🔘 Connect the phone to PC (remove battery if removable)
- ☎️ For keypad phones, hold proper key combination (0, *, #)
- 📊 Tool will detect the device automatically
- 🚀 Flashing process will start
⏳ Step 5: Wait & Finish
🔌 Do not disconnect your mobile phone during flushing.
- ⏱ Flashing time: 5–15 minutes depending on firmware size
- ✔️ When you see Download OK (Green)
- 🔌 Disconnect the phone
- 🔘 Power ON the device
⏳ First boot may take a few minutes.
❗ Common Problems & Fix
🔌Check properly Drivers
❌ Device not detected
- 🔄 Reinstall MTK USB drivers
- 🔌 Try different USB port (preferably USB 2.0)
- 🔘 Check key combination for keypad phones
❌ Fail at 0% / 1%
- 📂 Wrong scatter file / firmware selected
- ✅ Enable correct flashing mode (Download Only / Firmware Upgrade)
- 🛠 Try an older SP Flash Tool version
❌ Device stuck on boot / dead after flash
- 🔁 Re-flash using correct firmware
- ❌ Do NOT format unless instructed
🧠 Tips
❤️ Safe Flashing
- 🎯 Always flash exact model firmware
- 🚫 Do not disconnect USB during flashing
- 💾 Backup userdata if phone is working
🔥 Tools Used
- 🛠 SP Flash Tool (Smart Phone Flash Tool)
- 🔁 Flash Tool Alternatives: SP MDT / SP Upgrade Tool
💾 Backup
⚠️ Before flashing or installing firmware on your device, make sure to take a backup. Flashing may wipe all data from your keypad or smartphone device.
Firmware (Flash File) Information:
| Name: | Nokia_106_TA-1114_Clone_MT6250_MIRA |
| Size: | 36 MB |
| CPU: | MT6260 |
| OS: | China |
| Flash Tools: | Download |
| Drivers: | Download |
| Get Link: | Download |
| Password: | Free (No Password) |
Firmware Folder Information:
2. Insert USB Cable (Hold BootKey '*' if required)
Wait for phone...
Phone found! [6]
Sync...
Sync Ok, read regs...
Initial regs read done
Boot Info:
BB_CPU_ID : 6260
BB_CPU_HW : CA00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : MT6260 (MediaTek)
BROM Protocol Version : 05
BROM Stage Done
Flash:
MX25U3235E
Size : 3MB
Reading Flash...
Read OK – 3145728 Bytes
File:
J016F_5_V4.bin
👉 Please Support Us 👍Subscribe OUR YouTube Channel ❤️
While we strive to provide working and tested files, we do not take any responsibility for any damage to your device during the process. Please proceed at your own risk and ensure you have a backup of your data before flashing or installing any software.
