MT6737M__XTOUCH__E4__E4__7.0__alps-mp-n0.mp1-V1.0.2_esky6737m.35.n_P9
📦 Firmware / Flash File Overview
This appears to be a specific firmware or flash file used for MTK (MediaTek) devices.
- ⚙️ Chipset: MT6737M (MediaTek Quad-Core)
- 📱 Brand / Model: XTOUCH E4
- 🤖 Android Version: 7.0 (Nougat)
- 🧾 Build Version: V1.0.2
- 🧩 Board: esky6737m
❓ When Do You Need This Firmware?
You may need to flash this file if your phone is facing the following issues:
- 🔁 Bootloop: Phone stuck on logo screen
- ⚠️ Dead / No Boot: Phone not turning on due to software issue
- 🔒 Password / Pattern Lock: Forgotten lock and hard reset not working
- 🐢 Bugs / Slow Performance: System hangs due to corrupted files
🔧 Flashing Method (Basic)
To flash this firmware, you generally need SP Flash Tool.
- 💻 Drivers: MTK VCOM Drivers must be installed on your computer
- 📄 Scatter File: Select
MT6737M_Android_scatter.txtin SP Flash Tool - 🔌 Connection Mode: Power off the phone, hold Volume Up or Down, then connect USB cable
📥 XTOUCH E4 Stock Firmware ROM
Official Download & Flashing Guide
💻 On this page, you can find the official link to download the XTOUCH E4 Stock Firmware ROM (flash file) package for your computer.
📦 The firmware package comes as a compressed file (ZIP, 7z, RAR) which contains:
- 🗂 Flash File
- 🛠 Flash Tool
- ⚙️ USB Driver
- 📖 How-to Flash Manual
📱 We have shared stock ROMs for XTOUCH E4 with free download links below. Flashing is useful if the mobile is running slow or is completely broken due to outdated or corrupted firmware. Using these flash files/Stock ROMs can restore your device to working condition.
⚡ You can use different tools or boxes for flashing Android mobiles. Flashing with the latest flash files will restore your phone to its original settings. Before flashing, it is recommended to take a backup of your important data. After successful flashing, you can safely restore your backup data.
🔌 Flashing tools allow you to flash mobiles via USB data cable without the need for flashing boxes. Flashing with tools can be slightly more challenging than using boxes, but it allows you to install the latest firmware on your XTOUCH E4
ℹ️ Additional Information
Battery/Backup/Firmware
🔋 Your device must have at least 30% battery backup before starting the flashing process to avoid interruptions.
💾 Before flashing, always backup your data to prevent any data loss, as flashing will wipe all data on your device.
⚠️ It’s crucial to flash your device with the correct firmware. Using the wrong file can completely brick your device.
🎯 Always choose firmware based on your device’s
model and region.
Wrong firmware may cause permanent
damage.
🌐 If you need the official and latest USB driver for any 📱 Mobilephone device, visit the Smart and Feature phone Drivers
📱 How to Flash MTK (MediaTek) Smartphone
🤖 Android Phone
📱 Flashing an MTK (MediaTek) smartphone is a slightly technical process, but if you follow the correct steps carefully, it can be completed safely and easily.
📦 Before starting the flashing process, make sure you have downloaded and installed all the required files on your computer.
ℹ️ This is a simple and complete guide to flash an MTK (MediaTek) smartphone or keypad device. This method works on most MediaTek MT65xx, MT67xx, MT68xx, and MT69xx chipset devices.
🔧 Requirements
💻 Windows PC
To flash an MTK phone, you must have a stable Windows PC because flashing tools only work properly on computers. Rewriting system files is not possible without a PC.
📱 To flash an MTK (MediaTek) smartphone correctly, you need some essential requirements. If even one of these is missing, the flashing process may fail or the phone may become dead.
🖥️ 1. Hardware Requirements
Hardware requirements include a good-quality USB cable and a desktop or laptop PC to ensure stable data transfer during flashing. Additionally, the phone battery must be properly charged.
- 💻 Windows PC or Laptop: Flashing is always performed using a computer.
- 🔌 Original USB Cable: Use a good-quality data cable to avoid connection issues.
- 🔋 Phone Battery: Battery level should be at least 50%–70% before flashing.
⚠️ Make sure to carefully check the list below before starting:
- 💻 Windows PC (Windows 7 / 8 / 10 / 11)
- 🔌 Original USB cable
- 📂 MTK firmware file
- 📱 Scatter File (.txt)
- ☎️ .BIN / .PAC (for keypad phones)
- 🛠 SP Flash Tool (Smart Phone Flash Tool)
- ⚙️ MediaTek USB Driver installed
- 🔋 Phone battery charged (minimum 40%)
⚙️ Step 1: Install MTK USB Drivers
First, install the correct USB drivers on your computer so that the PC can properly detect your mobile device. Without drivers, the flashing tool will not be able to communicate with the phone.
- ⬇️ Extract the MTK USB Driver package
- ▶️ Run DriverInstall.exe
- 🔄 Restart your PC
⚠️ Driver installation is mandatory; otherwise, the PC will not detect the device.
🛠 Step 2: Open SP Flash Tool
Extract SP Flash Tool and run it in Administrator mode to ensure all permissions are granted. This tool is used to transfer firmware files directly to the phone’s hardware.
- 🖥 Run SP_Flash_Tool.exe as Administrator
- ⚙️ Click Choose Scatter File
- 📁 Select the firmware scatter file (.txt)
- ⏳ Wait until all firmware files load completely
⚙️ Step 3: Tool Settings (Important)
✔️ Check Tool Settings Carefully
Always verify tool settings and select only Download Only or Firmware Upgrade mode. Choosing the wrong option may erase IMEI or baseband information.
- ⚙️ Click Options / Settings
- ✅ Enable Download Only / Firmware Upgrade (recommended)
- ❌ Do NOT enable Format All unless absolutely necessary
- ✔️ Click OK to save settings
📲 Step 4: Flash the Phone
🔌 Do not disconnect your mobile phone during flashing.
After clicking the Download button, power off the phone and connect it to the PC. Do not move or disconnect the USB cable during the flashing process, as this may permanently damage the device.
- ▶️ Click Download in SP Flash Tool
- 🔴 Power OFF the phone
- 🔘 Connect the phone to the PC (remove battery if removable)
- ☎️ For keypad phones, hold the correct key combination (0, *, #)
- 📊 The tool will detect the device automatically
- 🚀 Flashing process will start
⏳ Step 5: Wait & Finish
🔌 Do not disconnect your mobile phone during flashing.
Do not disconnect the phone until you see the green Download OK message. After flashing, the first boot may take 5–10 minutes.
- ⏱ Flashing time: 5–15 minutes (depending on firmware size)
- ✔️ Green Download OK message appears
- 🔌 Disconnect the phone
- 🔘 Power ON the device
⏳ The first boot may take several minutes.
❗ Common Problems & Fixes
🔌 Check Drivers Properly
If flashing does not start, open Device Manager and verify the driver status. In many cases, old USB cables or incorrect drivers prevent the PC from detecting the phone.
❌ Device Not Detected
- 🔄 Reinstall MTK USB drivers
- 🔌 Try a different USB port (preferably USB 2.0)
- 🔘 Verify correct key combination for keypad phones
❌ Fail at 0% or 1%
- 📂 Wrong firmware or scatter file selected
- ✅ Select correct flashing mode
- 🛠 Try an older version of SP Flash Tool
❌ Device Stuck on Boot or Dead After Flash
- 🔁 Re-flash with correct firmware
- ❌ Do NOT format unless instructed
🧠 Tips
❤️ Safe Flashing
Always download firmware that exactly matches your phone’s model number and build version. Flashing incorrect firmware can permanently damage the device.
- 🎯 Always flash exact model firmware
- 🚫 Never disconnect USB during flashing
- 💾 Backup user data if the phone is working
🔥 Tools Used
SP / CM2 Flash Tool
SP Flash Tool is the best free tool for MediaTek devices. For professional repair work, CM2 dongle tools are commonly used and offer advanced features.
- 🛠 SP Flash Tool (Smart Phone Flash Tool)
- 🔁 Alternatives: SP MDT / SP Upgrade Tool
💾 Backup
Make Sure to Take a Backup
Before flashing, always back up your photos, contacts, and important data. Flashing performs a factory reset, and once the process starts, lost data cannot be recovered.
⚠️ Flashing firmware may erase all data from your keypad or smartphone device. Always take a backup before proceeding.
📱 Device Information
Basic hardware & software details
- 🏷️ Brand: XTOUCH
- 📲 Model: E4
- ⚙️ CPU: MT6737M
- 🆔 Internal Name: E4
- 🤖 Android Version: 7.0 (Nougat)
- 🕒 Compile Date: 28-03-2018 | 02:24 AM
- 📁 Project: alps-mp-n0.mp1-V1.0.2_esky6737m.35.n_P9
🔐 Supported Flash / BootLoader
Detected eMMC Flash IDs
- 📦 Samsung: F722MB (Vendor 15)
- 📦 Kingston: EH8CE8 (Vendor 70)
- 📦 Hynix: H8G4a (Vendor 90)
- 📦 Hynix: H8G1e (Vendor 90)
- 📦 Samsung: FNX2MB (Vendor 15)
💾 Memory Information
Installed RAM & Storage
- 🧠 RAM: 1 GB
- 💽 ROM: eMMC 8 GB
- 🏭 Manufacturer: Samsung
- 🧾 Memory Name: BM227
📂 Firmware / ROM Files
Scatter based firmware components
- 📄 boot.img
- 📄 cache.img
- 📁 Extra_Files
- 📄 lk.bin
- 📄 logo.bin
- 📄 MT6737M_Android_scatter.txt
- 📄 preloader_esky6737m_35_n.bin
- 📄 recovery.img
- 📄 secro.img
- 📄 system.img
- 📄 tz1.img / tz2.img
- 📄 userdata.img
👉 Please Support Us 👍Subscribe OUR YouTube Channel ❤️
⬇️ Download Section
While we strive to provide working and tested files, we do not take any responsibility for any damage to your device during the process. Please proceed at your own risk and ensure you have a backup of your data before flashing or installing any software.
