Nokia 106 TA-114 (China Clone Phone) Firmware (Flash File)
On this page, you can find the official link to download Nokia 106 TA-114 Stock Firmware ROM (flash file) package on the Computer.
The firmware package comes as a compressed file (zip,7z,rar file), which contains Flash File, Flash Tool, USB Driver, and How-to Flash Manual.
Here we have shared stock ROM’s for Nokia 106 TA-114 and free downloading links are available for download below. Flashing of mobiles does at those stage if mobiles are working slow or completely break with the reason of its outdated or corrupted firmware. At this moment you can use flash files/Stock ROM’s for flashing mobiles.
You can use different tools or boxes for flashing android mobiles, If you will your phone with its latest flash files it will be restore in its original settings so before flashing you will need to take a backup of your important data. After successful flashing you can restore your backup data to your phone safely.
Flashing tools helps you to flash mobiles via USB data cable without flashing boxes. It is little bit difficult work for to flash mobiles with tools instead of flashing with boxes. You can install latest firmware on your Nokia 106 TA-114
Your device must have at least 30% battery backup to perform the flashing process.
Before flashing your device, take a backup of your data and then proceed to avoid any data loss as the flashing process will wipe all your data.
It’s very important that you flash your device with the correct file. Using the wrong firmware can completely brick your device.
Always flash your device with the correct firmware based on the model and region, wrong firmware can completely brick your device.
If you want to download the official and latest USB Driver for any Samsung device, then head over to the Samsung USB Driver page.
How to Flash:
- Download and install Mobile USB drivers
- Download Flash File From Link and extract it
- Open supported Flash Tools/Box setup / Dongle.
- Select Correct Mobile CPU type From Setup and Choose flash file.
- Turn off the Mobile, remove the battery.
- Connect the Cellphone with USB data cable through Computer and insert Mobile battery again.
- Press and hold Mobile Boot Key (if required)
- Click on flash & then wait for the complete flash
- Complete of Flash remove USB data cable and power on the device.
- Enjoy it has done.
If you are about to flash or install the above firmware on your device, then take a
backup. As flashing or installing the firmware may wipe the data from the device.
Firmware (Flash File) Information:
|Password:||Free (No Password)|
1. Power Off Phone , Remove battery , Insert back2. Insert USB cable. In some cases require hold BootKey ( '*' )Wait for phone...Phone found! [ 6 ]Sync...Sync Ok, read regs...Inital regs read doneBoot Info :BB_CPU_ID : 6260BB_CPU_HW : CA00BB_CPU_SW : 0000BB_CPU_SB : 8000BB_CPU_NM : [MediaTek] MT6260_S0000BB_CPU_SN : 4D9F8531F99B109D28353F767B436B0ABROM Protocol Version : 05Setting...Setting done , result code 0x000EBROM stage doneSeek and prepare DownloadAgentDownloadAgent matching HW Found!DA verify and select doneSending DA to target ...InitRes : 00000000DEV : C200 2500 3600 0000DEV : 0000 0000 0000 0000DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8BSOC_VERIFY : 0xC1BOOT_STYLE : SF_FLASH_BOOTNOR Flash IC initialized : FLASH_VEN : 0x00DB , [MX] MX25U3235E : FLASH_DIE : 00C2 0025 0036 0000 : FLASH_LEN : 0x00300000INT_RAM : 0x0000D000EXT_RAM : 0x00400000Reading Flash Content now ...Read Flash nowRead Ok , 3145728 bytes readCheck and collect compile infoFile_Info : J016F_5_PCB01_gsm_MT6260_S00.J016F_5_V4.binFileVersion : J016F_5_V4
👉 Please Support Us ❤️ Subscribe OUR YouTube channel👍
Disclaimer: Shakeel File, Guarantee that the Mobile/Pc Apps, Firmware, Flash Tools, Software or any other files on this page are 100% correct But use "At your own risk".
Note: I hope you enjoy this article. Please do share this article. And if you are facing problem in any section or you have any question then ask us in comment box or you can Contact Us. Thank you!
Post a Comment