Jazz Digit 4G Elite CM2/SP Tool Firmware (Flash File) Fix Hang On Logo & Dead Boot Repair
MT6739__alps__mt6731__6.0__Digit_M42843DG_SW09_20201023_1839__MRA58K__Digit4G-Elite
JAZZ DIGIT4G ELITE LOGO FIX DEAD BOOT REPAIR
📥 Jazz Digit 4G Elite CM2/SP Tool Stock Firmware ROM
Official Download & Flashing Guide
💻 On this page, you can find the official link to download the Jazz Digit 4G Elite Stock Firmware ROM (flash file) package for your computer.
📦 The firmware package comes as a compressed file (ZIP, 7z, RAR) which contains:
- 🗂 Flash File
- 🛠 Flash Tool
- ⚙️ USB Driver
- 📖 How-to Flash Manual
📱 We have shared stock ROMs for Jazz Digit 4G Elite with free download links below. Flashing is useful if the mobile is running slow or is completely broken due to outdated or corrupted firmware. Using these flash files/Stock ROMs can restore your device to working condition.
⚡ You can use different tools or boxes for flashing Android mobiles. Flashing with the latest flash files will restore your phone to its original settings. Before flashing, it is recommended to take a backup of your important data. After successful flashing, you can safely restore your backup data.
🔌 Flashing tools allow you to flash mobiles via USB data cable without the need for flashing boxes. Flashing with tools can be slightly more challenging than using boxes, but it allows you to install the latest firmware on your Jazz Digit 4G Elite
ℹ️ Additional Information
🔋 Your device must have at least 30% battery backup before starting the flashing process to avoid interruptions.
💾 Before flashing, always backup your data to prevent any data loss, as flashing will wipe all data on your device.
⚠️ It’s crucial to flash your device with the correct firmware. Using the wrong file can completely brick your device.
🎯 Always choose firmware based on your device’s model and region. Wrong firmware may cause permanent damage.
🌐 If you need the official and latest USB driver for any 📱 Mobilephone device, visit the Smart and Feature phone Drivers
📱 How to Flash MTK (MediaTek) Smartphone
🤖 Android Phone
ℹ️ Here is a simple and complete guide to flash an MTK (MediaTek) phone or keypad device. This method works for most MediaTek MT65xx, MT67xx, MT68xx, MT69xx chipset devices.
🔧 Requirements
💻 Windows PC
- 💻 Windows PC (Windows 7 / 8 / 10 / 11)
- 🔌 Original USB cable
- 📂 MTK firmware file
- 📱 Scatter File (.txt)
- ☎️ .BIN / .PAC (for keypad phones)
- 🛠 SP Flash Tool (Smart Phone Flash Tool)
- ⚙️ MediaTek USB Driver installed
- 🔋 Phone battery charged (minimum 40%)
⚙️ Step 1: Install MTK USB Drivers
- ⬇️ Extract MTK USB Driver package
- ▶️ Run DriverInstall.exe
- 🔄 Restart your PC
⚠️ Driver installation is mandatory, otherwise the PC will not detect the device.
🛠 Step 2: Open SP Flash Tool
- 🖥 Run SP_Flash_Tool.exe as Administrator
- ⚙️ Click Choose Scatter File
- 📁 Select the firmware scatter file (.txt)
- ⏳ Wait until all firmware files load completely
⚙️ Step 3: Tool Settings (Important)
✔️ Check properly Tool settings
- ⚙️ Click Options / Settings
- ✅ Enable Download Only / Firmware Upgrade (recommended)
- ❌ Do NOT enable Format All unless necessary
- ✔️ Click OK to save settings
📲 Step 4: Flash the Phone
🔌 Do not disconnect your mobile phone during flushing.
- ▶️ Click Download in SP Flash Tool
- 🔴 Power OFF the phone
- 🔘 Connect the phone to PC (remove battery if removable)
- ☎️ For keypad phones, hold proper key combination (0, *, #)
- 📊 Tool will detect the device automatically
- 🚀 Flashing process will start
⏳ Step 5: Wait & Finish
🔌 Do not disconnect your mobile phone during flushing.
- ⏱ Flashing time: 5–15 minutes depending on firmware size
- ✔️ When you see Download OK (Green)
- 🔌 Disconnect the phone
- 🔘 Power ON the device
⏳ First boot may take a few minutes.
❗ Common Problems & Fix
🔌Check properly Drivers
❌ Device not detected
- 🔄 Reinstall MTK USB drivers
- 🔌 Try different USB port (preferably USB 2.0)
- 🔘 Check key combination for keypad phones
❌ Fail at 0% / 1%
- 📂 Wrong scatter file / firmware selected
- ✅ Enable correct flashing mode (Download Only / Firmware Upgrade)
- 🛠 Try an older SP Flash Tool version
❌ Device stuck on boot / dead after flash
- 🔁 Re-flash using correct firmware
- ❌ Do NOT format unless instructed
🧠 Tips
❤️ Safe Flashing
- 🎯 Always flash exact model firmware
- 🚫 Do not disconnect USB during flashing
- 💾 Backup userdata if phone is working
🔥 Tools Used
- 🛠 SP Flash Tool (Smart Phone Flash Tool)
- 🔁 Flash Tool Alternatives: SP MDT / SP Upgrade Tool
💾 Backup
⚠️ Before flashing or installing firmware on your device, make sure to take a backup. Flashing may wipe all data from your keypad or smartphone device.
📂 Jazz Digit 4G Elite SP Tool Firmware (Flash File) Information:
| Name: | Jazz Digit 4G Elite |
| Size: | 250 MB |
| CPU: | MT6731 |
| OS: | KaiOS |
| Flash Tools: | Download |
| Drivers: | Jazz4G Digit Mobile Drivers |
| Get Link: | Download |
| Password: | Free (No Password) |
📂 Firmware Folder Information:
ℹ️ Below is the list of files included in the MediaTek firmware folder. These files are required for flashing the device using SP Flash Tool.
📱 JAZZ DIGIT 4G ELITE – Logo Fix & Dead Boot Repair
- 🛠️ mtk_bypass_rev4.exe
- ⚡ SP Flash Tool v5.2136 (Windows)
🔐 Preloader Information
- 📦 Version: MTK_BLOADER_INFO_v32
- 📄 Name: preloader_fise6731_kaio_m.bin
- 🧠 CPU: MT6739
- 🏷️ Custom Name: CUST
- 💾 Flash Style: SPI_NAND
- 🧩 Flash Definitions: 6
- 📍 Load Address: 0x200f10
📂 Firmware Files
- 📁 boot.img
- 📁 cache.img
- 📁 lk.img
- 📁 loader_ext.img
- 🖼️ logo.bin
- ⚙️ mcupmfw.img
- 📡 md1dsp.img
- 📡 md1img.img
- 🧾 MT6731_Android_EMMC_scatter.txt
- 🔐 preloader_fise6731_kaio_m.bin
- ♻️ recovery.img
- ⚙️ spmfw.img
- 🗂️ system.img
- 🔒 tee.img
- 👤 userdata.img
🛡️ Security & NV Data
- 🧠 nvram.bin
- 🆔 proinfo.bin
- 🔐 protect1.img
- 🔐 protect2.img
How to Jazz Digit 4G Elite Firmware Fix Hang On Logo & Dead Boot Repair With SP Tools | Subscribe our YouTube Channel:
📂 Jazz Digit 4G Elite CM2 Firmware (Flash File) Information:
| Name: | Jazz Digit 4G Elite |
| Size: | 201 MB |
| CPU: | MT6731 |
| OS: | KaiOS |
| Flash Tools: | Download |
| Drivers: | Jazz4G Digit Mobile Drivers |
| Get Link: | Download |
| Password: | Free (No Password) |
📂 Firmware Folder Information:
ℹ️ Below is the list of files included in the MediaTek firmware folder. These files are required for flashing the device using InfinityBox CM2 Flash Tool.
📱 Firmware Name: MT6739__alps__mt6731__6.0__Digit_M42843DG_SW09_20201023_1839__MRA58K__Digit4G-Elite
- 🛠️ Created by: Infinity-Box (c) 2021
- 🔧 Tool: Chinese Miracle II - MediaTek Service Module
- 📄 Device Info File: _Android_info.txt
- 🛡️ Patch Level: MRA58K
- 💻 Display ID: Digit_M42843DG_SW09_20201023_1839
- 📦 Version Code Name: REL
- 📱 Android Version: 6.0
- 🗓️ Security Patch: 2015-10-01
- ⏰ Build Time: 23.10.2020
- 📌 Product Model: Digit4G-Elite / mt6731
- 🏷️ Product Brand: Digit
- 📛 Product Name: Digit4G-Elite
- 🔧 Product Device: Digit4G-Elite
- 🏭 Manufacturer: alps
- 🧠 Board Platform: mt6739
- 📄 Product Info: Digit4G-Elite
How to Jazz Digit 4G Elite Firmware Fix Hang On Logo/Dead Boot Repair With CM2 Tools | Subscribe our YouTube Channel:
Disclaimer: Shakeel File, Guarantee that the Mobile/Pc Apps, Firmware, Flash Tools, Software or any other files on this page are 100% correct But use "At your own risk".
⬇️ Download Section
❤️ Also Take a Look at These
CM2 Firmware | MT6739__alps__mt6731__6.0__Digit_M42843DG_SW09_20201023_1839__MRA58K__Digit4G-Elite
SP Tool Firmware | JAZZ DIGIT4G ELITE LOGO FIX DEAD BOOT REPAIR
SP_Flash_Tool_v5.2136
mtk_bypass_rev4
Note: I hope you enjoy this article. Please do share this article. And if you are facing problem in any section or you have any question then ask us in comment box or you can Contact Us. Thank you!
