QMobile QTab
MT6582__Q-TAB__Q16__S720__9.0__ALPS.L0.MP2.V1_TYD6582.WT.L_P14
On this page, you can find the official link to download MT6582__Q-TAB__Q16__S720__9.0__ALPS.L0.MP2.V1_TYD6582.WT.L_P14 Stock Firmware ROM (flash file) package on the Computer.
The firmware package comes as a compressed file (zip,7z,rar file), which contains Flash File, Flash Tool, USB Driver, and How-to Flash Manual.
Here we have shared stock ROM’s for MT6582__Q-TAB__Q16__S720__9.0__ALPS.L0.MP2.V1_TYD6582.WT.L_P14and free downloading links are available for download below. Flashing of mobiles does at those stage if mobiles are working slow or completely break with the reason of its outdated or corrupted firmware. At this moment you can use flash files/Stock ROM’s for flashing mobiles.
You can use different tools or boxes for flashing android mobiles, If you will your phone with its latest flash files it will be restore in its original settings so before flashing you will need to take a backup of your important data. After successful flashing you can restore your backup data to your phone safely.
Flashing tools helps you to flash mobiles via USB data cable without flashing boxes. It is little bit difficult work for to flash mobiles with tools instead of flashing with boxes. You can install latest firmware on your MT6582__Q-TAB__Q16__S720__9.0__ALPS.L0.MP2.V1_TYD6582.WT.L_P14
Additional Information:
Your device must have at least 30% battery backup to perform the flashing process.
Before flashing your device, take a backup of your data and then proceed to avoid any data loss as the flashing process will wipe all your data.
It’s very important that you flash your device with the correct file. Using the wrong firmware can completely brick your device.
Always flash your device with the correct firmware based on the model and region, wrong firmware can completely brick your device.
If you want to download the official and latest USB Driver for any Samsung device, then head over to the Samsung USB Driver page.
How to Flash:
- Download and install Mobile USB drivers
- Download Flash File From Link and extract it
- Open supported Flash Tools/Box setup / Dongle.
- Select Correct Mobile CPU type From Setup and Choose flash file.
- Turn off the Mobile, remove the battery.
- Connect the Cellphone with USB data cable through Computer and insert Mobile battery again.
- Press and hold Mobile Boot Key (if required)
- Click on flash & then wait for the complete flash
- Complete of Flash remove USB data cable and power on the device.
- Enjoy it has done.
Backup:
If you are about to flash or install the above firmware on your device, then take a
backup. As flashing or installing the firmware may wipe the data from the device.
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Q-TAB
Device Model : S720
Device CPU : MT6582
Device IntName : Q16
Device Version : 9.0
Device Compile : 05/05/2021 8:56:47 am
Device Project : ALPS.L0.MP2.V1_TYD6582.WT.L_P14
Device ExtInfo : Q16
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040502A12B036157
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040502A12B036157
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x09670D4280C4E94E9E2615A9F2A681F8
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : Q-TAB
ProdName : Q16
ProdModel : Q16
Device : S720
AndroidVer: 9.0
MTKxCPU : MT6582
MTKxPRJ : ALPS.L0.MP2.V1_TYD6582.WT.L_P14
[Read Ok] : preloader_tyd6582_wt_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6582 / V1.1.1 / tyd6582_wt_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1649 MiB
Scatter saved to : C:\Users\malik\OneDrive\Desktop\MT6582__Q-TAB__Q16__S720__9.0__ALPS.L0.MP2.V1_TYD6582.WT.L_P14\
All done!
👉 Please Support Us ❤️ Subscribe OUR YouTube Channel 👍
Disclaimer: Shakeel File, Guarantee that the Mobile/Pc Apps, Firmware, Flash Tools, Software or any other files on this page are 100% correct But use "At your own risk".
Download-Section:
Also Take a Look at These
MT6582__Q-TAB__Q16__S720__9.0__ALPS.L0.MP2.V1_TYD6582.WT.L_P14
Note: I hope you enjoy this article. Please do share this article. And if you are facing problem in any section or you have any question then ask us in comment box or you can Contact Us. Thank you!
